W1030

W1030 is a powerful power analyzer which is able to measure and record the electrical parameters of the circuit breaker and 4 connected feeders. The numbers of feeders are expandable to 16 feeders using W1034 modules. While having the ability to measure and record voltage, current, neutral current, power factor, active, reactive and apparent powers, active and reactive energies for all the feeders, this device can measure and record 2nd to 15th voltage, current and neutral current harmonics, voltages THD and Currents THD for the circuit breaker. Also recording both the environmental temperature and transformer temperature would help to monitor and analyze the effect of harmonic loads. All the records are stored in the internal memory and transferred to the server using internet. The measured parameters which are transferred to the server by mobile networks make the charts and the data available to be monitored in order to calculate the loss reduction, load balance, load profile, PF correction and etc.

Features:
Measure, Display  and Store
Voltage* Line
Phase
Average
Unbalance
Current Line
Average
Neutral
Unbalance
Active Power Phase
Total
Reactive Power Phase
Total
Apparent Power Phase
Total
Power Factor

Harmonic*

Even, Odd

2 to 15st Line Voltage
2 to 15st Line Voltage
2 to 15st Line Voltage

Total Harmonic Distortion*

Line Voltage
Line Current
Temperature** Transformer
Ambient
Frequency
Current Range
Rogowski coils up to 4000A
Data Logging
Records 1 minute to 1 hour period
Communication
Offload stored data on USB flash disk
Two RS485** MODBUS protocol
Internal Communication
WiFi Module
Power Supply
Wide Range 80-500VAC
Other Features
Expandable to 16 feeders
Current unbalance alarm LED
Fault CT polarity correction
Memory 4 GB
HMI* 2*16 text LCD
6 Key
1000 impulse/kwh Energy pulse
Daylight saving
Software correction
Standards
Measurement IEC62053-22, IEC62053-24
EMC IEC61439-1, IEC62271-1
Mechanical Parameters
Dimensions 158x87x60mm
Mounting DIN rail
Weight 400 gr
Environmental Conditions
Operating Temperature -20 to 70 °C
Storage Temperature -30 to 80 °C

*    Only main Channel on W1030

**   W1030

*** W1034

...

Contact Us

About us

Mashhad Tadbir Company was founded in 1996.Our main products are power analyzers, measurement and recording devices for electrical parameters of power systems, data loggers and handy data collectors.
The company is consisted of these sections: Management, Administrative, Commercial, R&D, Test and calibration, Customer service, Warehouse

Get to know us
 

Mashhadtadbir, Co
Mashhad Tadbir building
Namaz 1/2,Namaz 1, Namaz Blvd., End of Hashemiye st.
Mashhad, Iran

Tel: (+98) 51 38229500
Tel: (+98) 51 36068499
Fax (+98) 51 38229504
Fax (+98) 51 36070058